Rapier 50 HDZ SPECIFICATION
Rapier 50HDZ High Definition ANPR cameras combines zoom enabled 1.3MP ANPR and 1.3MP overview camera in a single IP68 enclosure.
ANPR Recognition Range and Field of View
Typically 5 to 45 metres determined by 10-40mm lens.
Field of view typically 6-8m (2 lanes of traffic with EU style plates) at high speed with very high accuracy
High power pulsed LED arrays (White Light, 740nm, 850nm or 940nm) with lens beam pattern options.
Wide angle for 10-20mm (5-20m recognition); Narrow angle for 20-40mm (20-45m recognition)
1/1.8” sensor with 1280(H) x 1024(V) effective picture elements providing raw 1.3 Megapixel images
Camera based Area of Interest (AoI) facilities and scaling possible via SDK or control application
Up to 50 images per second (ips). Snap mode also allows triggered single or sequential capture
Exposure Time / Equivalent Shutter (based on 50 ips)
Global exposure time 50μs - 20ms / Equivalent shutter speed 1/20,000th to 1/50th second
Focal Length: 10mm to 40mm (37.5° to 9.75° HFoV); Focus: 1m to infinity; Iris:F1.8 – F16. No presets.
Illumination pulse width, offset and power variable under software control including tracking of exposure
Colour 1/1.8” sensor with 1280(H) x 1024(V) effective picture elements providing raw 1.3 Megapixel images
Connectivity and Cabling
Waterproof RJ45 x 2 and Binder 720/12 power connectors
Maximum CAT6 cable length 100m without GigE network relay; CAT5e on shorter connections (4 pairs)
Camera Control Protocols
GigE SDK and AVML for motorised lens, IR and overview via serial over IP connection (single cable)
163 x 163 x 114 mm (cylindrical) - excluding brackets/sunshield
IP68 hermetically sealed hard anodised aluminium in natural aluminium with rugged mount options
Camera only 2.45 Kg – Camera with Sunshield and bracket 3.00 Kg
Options and Accessories
-20°C to 50°C operating
Cable harness sets
The camera is fitted with high-grade locking connectors. Connection from the Rapier to the ANPR equipment is available through CAT5e cabling. The unit is powered by12VDC power and has I/O connectivity for triggering multiple units.
A range of metal cradles, brackets and sunshields are available for fixed installations. Modified and bespoke metalwork can be designed and supplied to meet specific demands. Standard ranges include rapid fixing brackets/adaptors to standard CCTV (4” / 102.5mm PCD) and tripod connectors in pole/wall mount configurations with tilting/panning and yaw capabilities for better alignment. The sunshields are available in a variety of construction techniques and sizes.
Pan and Tilt
MAV Systems provide pan and tilt heads, and interface units, to enable remote movement of the camera position. Pan and Tilt units have jog and preset capabilities that can be combined with presets to create
integrated fixed platforms. Pan and Tilt interfaces support industry standard protocols, with enhanced features through the MAV AVML protocol.
Friendly, helpful service for product ordering and repair returns
Comprehensive pre- and post-sale technical support for full life of the product
12 month warranty, extended warranties and factory repair/replacement
Long Term Supply
Complete support for full life of the product
Comprehensive product training programmes for customers