The Rapier 30HD range offers a choice of either 2.0MP or 1.3MP models as a compact ANPR capture head with integrated illumination. These models provide digital ANPR images without any compression allowing every pixel to count. The 2.0MP model will capture license plates over a 10m width when reading EU plates whilst the 1.3MP model still captures plates within 7m of traffic lanes.
The Rapier 30HD is offered with a range of high quality fixed lenses for a choice of target distances with preset focus that covers the full capture range.
Rapier 30HD uses a custom designed bandpass filter and an improved bank of infrared illuminators for full width multilane operation.
Rapier 30HD has been designed for ease of install on vehicles including use within lightbars and is fully hermetically sealed to IP68.
Rapier 30 HD SPECIFICATION
Rapier 30HD is available with the, 1.3MP Sensor and a range of IR including 850nm or 940nm with a choice of lens to meet your exact requirements.
Specification
Recognition Range
Typical recognition range 8m to 20m. Choice of lens 8mm, 12mm, 16mm, 25mm
Horizontal Field of View
1.3MP: 7m (approx. 2 lanes of traffic) at high speed with very high accuracy
Illumination
12 high power pulsed micro-lens LED arrays to match choice of optical lens. 850nm or optionally White Light, 740nm or 940nm
Illumination features
Continuous Pulsed, Snap Mode and Triggered sequences available
Image
1.3MP: 1/1.8” sensor with 1280(H) x 1024(V) providing raw 1.3 Megapixel images
Image manipulation
Camera based Area of Interest (AoI) facilities and scaling possible via SDK/application
Frame rate
1.3MP: Up to 50 images per second (ips) set by SDK/application. Snap mode also allows triggered single or sequential capture
Exposure Time
Global exposure 50μs - 20ms / Equivalent shutter speed 1/20,000th to 1/50th second
Illumination period/power
Illumination pulse width, offset and power variable under software control including tracking of exposure
Cabling
Supplied with 3 x fitted 0.5m GigE and composite cables – extendable within limits of 803.2at type 2 standards
Camera Control Protocols
GigE SDK and AVML and other standards available via GigE
Power Requirement
10.5 – 15VDC
Power Consumption
Nominally 14W
Physical (WxHxD)
138 x 57 x 148 mm (WxHxD) - excluding brackets/sunshield
Enclosure
IP68 hermetically sealed hard anodised aluminium in black with rugged mount options
Temperature / Humidity
-20°C to 50°C operating with relative humidity 0%RH to 100%RH (hermetically sealed)
Options and Accessories
Cable harness sets
Connection from the Rapier to the ANPR equipment is available through 2 inline Binder connectors 0.5M long extra adapters 720/8 to CAT5e cable, and 720/5 to powered over the DC
Brackets / Sunshields
A range of metal cradles, brackets and sunshields are available. Modified and bespoke metalwork can be designed and supplied to meet specific demands.
Pan and Tilt
MAV Systems provide pan and tilt heads, and interface units, to enable remote movement of the camera position. Pan and Tilt units have jog and preset capabilities that can be combined with presets to create integrated fixed platforms. Pan and Tilt interfaces support industry standard protocols, with enhanced features through the MAV AVML protocol.
Service
Customer Service
Friendly, helpful service for product ordering and repair returns
Technical Support
Comprehensive pre- and post-sale technical support for full life of the product
Warranty
12 month warranty, extended warranties and factory repair/replacement
Long Term Supply
Complete support for full life of the product
Training
Comprehensive product training programmes for customers
